Results™ METAL Heat Transfer Vinyl A Hot Contemporary Soft Foil look film that is also easy to work with.
Results™ METAL Film is a new Polyurethane CUT film with a shiny metallic surface that contours to the fabric and remains very soft and attractive after many wash and wear cycles. High fashion, night scene, dance, when you want to stand out in any crowd, this is the Flexible, easy to cut, ultra-soft hand, and applies in seconds. You can customize the surface with a Teflon or Mesh fabric when heat pressing over the transfer design. Easy to cut & easy to weed 50-60 Micron film with a light adhesive liner.
- Maximum Illumination.
- No flaking, or peeling.
- Quick one-off or high volume production
- Small to large logos, numbers and designs
- Transfers can be stacked without material damage.
Recommended for Cottons, 50/50’, Polyesters, Acrylic, Lycra and more. Available Colors: GOLD & SILVER ONLY
- Cut Job in reverse.
- Weed the excess film media away from image.
- Pre-heat garment 2 to 3 seconds.
- Position film where desired.
- Heat Press at 305°F 8-10 seconds. Med. pressure (psi 60)
- Hot/Warm Peel.
- REPEAT. Heat Press at 305°F 8-10 seconds. Medium pressure (psi 60).
- Do not place Steam Iron on top of film.
- Not suitable for Commercial Dry-Cleaning.
- Note: Do not Iron or Dry Clean.