Guides

1. Cut in mirror (reverse) with a 45° blade.
2. Weed away unwanted film from around the image.
3. Turn over face down on fabric.
4. Heat apply at 300° F with medium pressure for 8 – 10 seconds.
5. Peel warm to hot.
6. Machine wash and dry in normal conditions.

Color Application

1. Preheat the garment for 3 – 4 seconds.
2. Place the weeded graphic liner side up.
3. Heat press with medium pressure at 305° F for 8 – 10 seconds.
4. Peel liner when the garment is warm to cool.
5. If needed, cover and press an additional 3 – 5 seconds.

Color Application (Layered – Cotton Only)

1. Preheat the garment for 3 – 4 seconds.
2. Place the weeded background graphic liner side up.
3. Tack press with medium pressure at 300° F for 3 seconds. Peel hot.
4. Place the weeded foreground graphic liner side up.
5. Heat press with light pressure at 300° F for 6 – 8 seconds. Peel hot.
6. Cover with kraft paper and seal for 5 – 7 seconds.

1. Cut in mirror (reverse) with 45-degree carbide blade.
2. Weed away unwanted film around the image.
3. Heat apply at 275° F with medium pressure for 10 – 12 seconds.
4. Peel colors COLD. Black and white can be hot-peeled.
5. Wash in normal conditions. Dry cleaning suitable.
6. For sensitive fabrics, heat apply as low as 240° F for 15 seconds. Peel warm.

Application to Cotton

1. Preheat the garment for 3 – 4 seconds.
2. Place the weeded graphic liner side up.
3. Heat press with medium pressure at 305° F for 8 – 10 seconds.
4. Peel liner when the garment is hot/warm.

Application to Synthetic Material (No Nylon)

1. Preheat garment for 3 – 4 seconds.
2. Place weeded graphic liner side up.
3. Heat press with medium pressure at 280° F for 12 – 15 seconds.
4. Peel liner when the garment is hot.

1. Blade: 45° Carbide
2. Force: Lightly score the liner.
3. Cut Speed and Direction: Reverse at 10 – 30 inches per second.
4. Heat Application: 300° F for 8 – 10 seconds. Peel hot to warm.
5. Wash inside-out. Tumble dry low. Do not dry clean or bleach.

1. Design and cut KWIK-ADH in reverse.
2. Weed away excess material.
3. Pre-heat for 2 seconds to flatten fabric.
4. Lay adhesive side flat on the heat press and use a cover sheet.
5. Tack apply at 300° F for 5 seconds.
6. Peel warm/hot to expose the adhesive.
7. Lay the foil shiny/color side up. Lay flat for 100% edge to edge coverage.
8. OPTIONAL: Crunch for a distressed look.
9. Heat apply with firm pressure and a cover sheet at 300° F for 15 – 20 seconds.
10. Peel away when cool. Cold peel only.

Note: Turn it up with a distressed look. Come back with another foil color and lay it flat to fill in the open areas that only show the adhesive. Just follow step 9 and 10 again.

Color Application (Shiny Finish)

1. Preheat garment for 3 – 4 seconds.
2. Place the weeded graphic liner side up.
3. Heat press with medium pressure at 305° F for 8 – 10 seconds.
4. Peel liner when the garment is cold.
5. For a matte finish, cover and press an additional 3 – 5 seconds.

1. Use a carbide 45° blade and cut in mirror image.
2. With a cover sheet, heat apply at 300° F with medium pressure for 8 – 10 seconds.
3. Peel when cooled.
4. Fabrics: Cotton, Polyester, Polyester blends, and more.

1. Cut in mirror reverse with 45° degree blade at medium pressure.
2. Heat press 2 seconds to lay fabric flat.
3. Place NiteLite vinyl face down.
4. Cover with parchment paper.
5. Press at medium pressure (60 psi) 285°F – 300°F, 8-10 seconds
6. Peel warm.

1. Print in reverse, cut, and then weed out the excess film surrounding the image.
2. Allow 30 – 40 minutes for ink to gas out before applying to the fabric.
3. NO MASK is required.
4. Pre-heat fabric for 2 seconds.
5. Place ink side down on fabric.
6. Heat press at 245° – 300° F for 8 – 10 seconds with medium pressure.
7. Use a cover sheet for 8 – 10 seconds and peel cold.

Typical Application

1. Preheat garment for 2 seconds with medium pressure (20 seconds for nylon/polyester).
2. Place the weeded graphic liner side up.
3. Heat press with medium pressure at 285° F for 8 – 10 seconds.
4. Peel liner when the garment is warm to cool.

Application for Heavy Dye Saturation

1. Preheat the garment for 2 seconds with medium pressure.
2. Place the weeded graphic liner side up.
3. Heat press with medium pressure at 240° F for 12 – 15 seconds.
4. Peel liner when the garment is warm to cool.
5. Cover and seal, if necessary.

1. Print, cut, and then weed the excess film surrounding the image.
2. Allow 30 – 40 minutes for the ink to gas out before masking.
3. Apply all-purpose Results® MASK over the image.
4. Pre-heat fabric for 2 seconds.
5. Peel back printed transfer from liner & then place ink-side down on fabric.
6. Heat Press at 285° F – 300° F for 8-10 seconds with medium pressure.
7. Lower heat will minimize dye-migration.
8. Use a cover sheet for 8 – 10 seconds and peel hot to warm.

1. Design image right reading using the suggested printer profile.
2. Print at 360 – 720 dpi.
3. Print and contour cut with a 45° degree blade with approximately 65 – 70 g cutting force.
4. Weed away unwanted film around the image.
5. After printing, let the ink de-gas for 20 minutes.
6. Mask with Results® J MASK. Remove from liner.
7. Preheat fabrics for 2 seconds. Preheat nylon & silicone-coated fabrics for 20 seconds at 300° F.
8. Apply Results® Platinum Print PLUS™ with fabric warm. Use a cover sheet.
9. Heat press from 240° F to 300° F for 8 – 12 seconds. Note: Less heat = more time.
10. Peel warm, not hot.

1. Preheat the garment for 3 – 4 seconds.
2. Place weeded graphic liner side up.
3. Heat press with medium pressure at 300° F for 4 seconds.
4. Remove liner. Replace with parchment paper.
5. Heat press with medium pressure at 300° F for 10 – 12 seconds
6. Remove parchment paper when the garment is hot.

1. Note: First, peel away any plastic that is protecting the film.
2. Make a test cut with a 45° blade in a MIRROR IMAGE with 130 g of pressure.
3. Weed the excess film media away.
4. Heat press at 305° F with medium pressure (60 PSI).
5. Pre-heat the garment for 2 seconds to flatten or take out moisture.
6. Position the film on the garment and heat for 8 seconds.
7. Wait 3 seconds and peel away the carrier sheet when warm or cool.
8. Place kraft paper or a Teflon sheet over the image and heat press again for 3 seconds.

Color Application

1. Preheat the garment for 3 – 4 seconds.
2. Place the weeded graphic liner side up.
3. Heat press with medium pressure at 305° F for 8 – 10 seconds.
4. Peel liner when the garment is warm – cool.
5. If needed, cover and press an additional 3 – 5 seconds.

Color Application (Layered)

1. Preheat the garment for 3 – 4 seconds.
2. Place the weeded background graphic liner side up.
3. Tack press with medium pressure at 300° F for 3 seconds. Peel hot.
4. Place the weeded foreground graphic liner side up.
5. Heat press with light pressure at 300° F for 6 – 8 seconds. Peel hot.
6. Cover with kraft paper and seal for 5 – 7 seconds.

• Time: 8-12 seconds
• Temperature: 300° F
• Pressure: Medium
• Peel: Hot or Cold
• Layer: Yes
• Cover & Seal: Only when layering